Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However when you have double pane windows that are anchored by internal beading, it will be more difficult to remove the old panes and put in new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea to seal the gap after the glass is removed. This will stop drafts and water from entering your home until a professional is able to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues, including sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the an appropriate fit. If you're satisfied with the fit of your window, tighten the screws to secure them in place.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, timber it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles could also loosen. This is typically caused by screws that have become undone over time, but it can also be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's crucial to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer of caulk can be applied. When it is time to uPVC repair double glazing window, it is important to avoid over-caulking. This can make your window more difficult to clean and reduce its energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It is very easy to change a window hinge but it's much easier if someone else helps hold the frame.

Make sure that the uPVC hinges are closed and open in the right direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to give suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, could become misaligned. This causes gaps to develop where the sash joins the frame. They can be repaired by giving them a good cleaning, but if they are beyond repair it might be necessary to have them aligned or replaced. Second, the interlock can also become unbalanced. It is located on the hinge side and could require to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder. These are usually fabric tubes which are filled with a type of filler. They can be positioned on the top of your windowsill. They can help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home with a little regular maintenance and timber repairs. It is essential to remember that all windows eventually wear out and it could be more cost-effective to simply replace them rather than repair them. If you have any problems with your Upvc window it is recommended to speak with a professional as soon as you can.